MA25-5Ⅱ

Injin tsakiya guda biyu [MA25-5Ⅱ]

Ba za a iya canza hannun rigar jagora/m hannun riga mai motsi bisa ga buƙatun aikin aikin;
Sanyin wutan lantarki mai sanyaya mai ya fi sanyaya daidai gwargwado fiye da sandal ɗin lantarki mai sanyaya iska kuma ya fi kwanciyar hankali fiye da sandal ɗin inji;
Cikakkun mota, bincike na asali ta atomatik lokacin da aka kunna na'ura da kashewa, adana lokaci, matsala da aiki;
Dauki NSK bearings, THK waya ma'auni / dunƙule, high daidaito da kuma tsawon rai;
Babban / sub-spindle misali C-axis madaidaicin matsayi na ƙididdigewa, cikakkun ayyuka kuma babu na yau da kullun;
Shugaban wutar lantarki na gefen spindle 2 ramuka / sub-spindle 4 ramuka suna tallafawa aikin fadada toshe;
Daidaitaccen aikin gano yanke-kashe;

Raba samfuran:

Twin sandal zane don sarrafa guda biyu workpieces, inganta yadda ya dace
5-axis CNC tsarin kula da high daidaito da kuma versatility a machining ayyuka
Servo motor koran spindles suna ba da aiki mai santsi kuma abin dogaro
Fuskar allon taɓawa mai sauƙin amfani don aiki mai sauƙi da saka idanu na ainihi
Ƙirar ƙaƙƙarfan ƙira mai ɗorewa wanda ya dace da aikace-aikacen masana'antu daban-daban

MA25-5Ⅱ na'ura ce mai ci gaba mai ci gaba mai ninki biyu wacce aka ƙera don daidaito da inganci wajen sarrafa kayan aikin siliki. Tare da ƙirar tagwayen tagwayen sa, MA25-5Ⅱ yana ba da damar sarrafa kayan aiki guda biyu a lokaci guda, yana haɓaka haɓaka aiki sosai. Na'urar tana da tsarin kula da CNC na axis 5, yana ba da daidaito na musamman da sassauci don hadaddun ayyukan machining. Sanye take da servo motor kore spindles, yana tabbatar da abin dogara da kuma santsi aiki. Fuskar allo mai saurin fahimta yana sauƙaƙa aiki da saka idanu, yana mai da shi isa ga masu aiki na duk matakan fasaha. Ƙaƙƙarfan ƙirarsa da ƙaƙƙarfan ƙira ya sa ya dace da yanayin masana'antu da yawa.

Spindle Biyu Swiss CNC Lathe MA25-5 II
System	Taiwan SYNTEC	Syntec210TB-A
	Tashoshi masu sarrafawa	Dual tashar
	Mafi ƙarancin saitin naúrar	0.001mm
Machining Ability	Matsakaicin diamita na sarrafawa	25 mm
	Matsakaicin tsayin ciyarwa guda ɗaya	Rotary jagora daji	195mm
		Ba tare da daji jagora ba	1: 2.5D (Dia: Length)
	Main spindle max drilling Dia	axial (babban spindle)	Φ10mm
	Babban sandar zazzage Dia	axial	M8
	Rotary kayan aikin max drilling Dia	radial	Φ8mm
	Rotary kayan aikin max tapping Dia	radial	M6
	Sub spindle max drilling Dia	Axial (sub spindle)	Φ8mm
	Sub spindle max tapping Dia	axial	M6
Kayayyakin aiki,	Tsarin tushen kayan aiki	Tushen kayan aikin jere na sama
	Babban kayan aikin OD na spindle	6 guda	110X10mm+512X12
	Babban kayan aikin jujjuyawar kai tsaye na gefen spindle	4 guda	2ER11+2ER16
	Kafaffen kayan aiki na ƙarshen ƙarshen sandal	4 guda	Saukewa: ER11/ER16
	Kafaffen kayan aiki na ƙarshen spindle	4 guda	Saukewa: ER11/ER16
Spindles	Nau'in babba/Sub ɗin sandal	Na ciki mai sanyaya wutar lantarki spindle
	Babban gudu/Ƙarƙashin igiya	10000rpm / min
	Babban/Ƙasashen Ƙarƙashin Ƙarfafawa	0.001 °
	Babban/Sub sandal ta rami Dia	26mm
	Babban/Babban tsayin igiya	1018.5mm
Motors	Babban ikon igiyar igiya (Rated/Max)	2.5kw / 3.7kw
	Ƙarfin igiya (Rated/Max)	2.5kw / 3.7kw
	Side Rotary kayan aikin ikon motor	1.0kw
	Gudun kayan aikin jujjuyawar gefe	ER11*2 guda	10000rpm / min
		ER16*2 guda	6000rpm / min
	Matsakaicin motsi	5 axis	X1、Y1、Z1、X2、Z2
	Gudun ciyarwa da sauri	X1	24m / min
		Y1, Z1, X2, Z2	32m / min
	Ƙarfin motar motsa jiki	1.0kw
wasu	Mai tara sassa	Gajerun sassa	Mai ɗaukar bel don tattara sassa
		Dogayen sassa	fitar da baya daga sub spindle
	Ƙarfin wutar lantarki	15kw
	iska matsa lamba	0.4MPa ko sama
	Iyakar tankin mai na inji	250L
	Girman Lathe	2.4m×1.4m×1.7m
	Nauyin Lathe	3050KG

Menene matsakaicin matsakaicin girman diamita na MA25-5Ⅱ?
- Matsakaicin girman diamita na workpiece yawanci kusan mm 25, kodayake ya kamata a tabbatar da takamaiman ƙayyadaddun bayanai daga bayanan fasaha.
Ta yaya na'ura ke tabbatar da daidaito mai tsayi?
- Injin yana amfani da tsarin kula da CNC mai axis 5 da servo motor spindles don cimma daidaito da daidaito.
Shin MA25-5Ⅱ ya dace da yanayin samarwa na atomatik?
- Ee, ana iya haɗa injin ɗin cikin layin samarwa ta atomatik saboda tsarin kula da CNC na ci gaba.
Wani nau'in haɗin mai amfani ya ƙunshi fasalin MA25-5Ⅱ?
- Na'urar tana sanye take da mai amfani da allon taɓawa don sauƙin aiki da saka idanu.
Menene buƙatun sararin samaniya don shigar da MA25-5Ⅱ?
- Ƙaƙƙarfan ƙirar injin ɗin ya sa ya dace da mahalli tare da iyakacin filin bene.
Shin MA25-5Ⅱ na iya ɗaukar nau'ikan kayan aiki daban-daban?
- Ee, injin ɗin yana da iyawa kuma yana iya ɗaukar kayan aikin silindi iri-iri a cikin ƙayyadadden ƙarfin diamita.